The Application of Fractal Transform and Entropy for Improving Fault Tolerance and Load Balancing in Grid Computing Environments

This paper applies the entropy-based fractal indexing scheme that enables the grid environment for fast indexing and querying. It addresses the issue of fault tolerance and load balancing-based fractal management to make computational grids more effective and reliable. A fractal dimension of a cloud of points gives an estimate of the intrinsic dimensionality of the data in that space. The main drawback of this technique is the long computing time. The main contribution of the suggested work is to investigate the effect of fractal transform by adding R-tree index structure-based entropy to existing grid computing models to obtain a balanced infrastructure with minimal fault. In this regard, the presented work is going to extend the commonly scheduling algorithms that are built based on the physical grid structure to a reduced logical network. The objective of this logical network is to reduce the searching in the grid paths according to arrival time rate and path’s bandwidth with respect to load balance and fault tolerance, respectively. Furthermore, an optimization searching technique is utilized to enhance the grid performance by investigating the optimum number of nodes extracted from the logical grid. The experimental results indicated that the proposed model has better execution time, throughput, makespan, latency, load balancing, and success rate.     

Geometric and operational optimization of 20-kHz probe-type sonoreactor for enhancing sonochemical activity

The use of a 20-kHz probe-type sonicator irradiating downward in a 500 mL vessel was optimized for the enhancement of the sonochemical activity in terms of the geometric and operational factors. These factors included the probe immersion depth (the vertical position of the probe), input power, height of the liquid from the bottom, horizontal position of the probe, and thickness of bottom plate The sonochemical oxidation reactions were investigated both quantitatively and qualitatively using calorimetry, KI dosimetry, and luminol (Sonochemiluminescence, SCL) techniques. The sonochemical activity was very positively affected by the vertical boundaries. The highest sonochemical activity was obtained when the probe was placed close to the bottom of the vessel (immersion depth of 60 mm), with a high input power (input power of 75%), and optimal liquid height condition (liquid height of 70 mm). The SCL image analysis showed that the cavitational activity zone gradually expanded around the probe body and changed into a circular shape as the experimental conditions were optimized, and consequently the sonochemical activity increased. The formation of a large bright circular-shaped activity zone could be attributed to the strong reflections of the ultrasound firstly, at the vessel bottom and secondly, at the liquid surface. On the other hand, the cavitational activity zone and the sonochemical activity were negatively affected by the horizontal boundaries when the probe was placed close to the side wall of the vessel. In addition, it was found that the sonochemical activity was also significantly affected by the thickness of the support plate owing to the reflection and transmission of the ultrasound at the boundary between the liquid and the solid media.     

A volatolomic approach using cerumen as biofluid to diagnose bovine intoxication by Stryphnodendron rotundifolium

An innovative volatolomic approach employs the detection of biomarkers present in cerumen (earwax) to identify cattle intoxication by Stryphnodendron rotundifolium Mart., Fabaceae (popularly known as barbatimão). S. rotundifolium is a poisonous plant with the toxic compound undefined and widely distributed throughout the Brazilian territory. Cerumen samples from cattle of two local Brazilian breeds (‘Curraleiro Pé-Duro’ and ‘Pantaneiro’) were collected during an experimental intoxication protocol and analyzed using headspace (HS)/GC–MS followed by multivariate analysis (genetic algorithm for a partial least squares, cluster analysis, and classification and regression trees). A total of 106 volatile organic metabolites were identified in the cerumen samples of bovines. The intoxication by S. rotundifolium influenced the cerumen volatolomic profile of the bovines throughout the intoxication protocol. In this way, it was possible to detect biomarkers for cattle intoxication. Among the biomarkers, 2-octyldecanol and 9-tetradecen-1-ol were able to discriminate all samples between intoxicated and nonintoxicated bovines. The cattle intoxication diagnosis by S. rotundifolium was accomplished by applying the cerumen analysis using HS/GC–MS, in an easy, accurate, and noninvasive way. Thus, the proposed bioanalytical chromatography protocol is a useful tool in veterinary applications to determine this kind of intoxication.     

Optimization of extraction and quantification technique for phenolics content of garlic (Allium sativum): An application for comparative phytochemical evaluation based on cultivar origin

A range of conventional, i.e. maceration, percolation, ultrasonic assisted, Soxhlet and Soxtec extraction (STE), to advanced extraction techniques of accelerated solvent extraction (ASE) was utilized for the first time in order to optimize the extract yield and recovery of phenolics—gallic acid (GA), rutin (RT) and quercetin (QT)—quantified via ultra-high performance liquid chromatography with diode array detector (UHPLC–DAD). The effect of solvents (n-hexane, dichloromethane and methanol) and temperature (60, 80 and 100°C) upon extraction yield, phenolic content and antioxidant activity (DPPH, ABTS and DPPH) was studied, and the method was validated in commercial food samples from Saudi Arabia, China and India. A high extract yield with percentage recovery was observed for STE (1221.10 mg/5 g; 24.42%) and ASE techniques (91.50 mg/1 g; 9.15%) in methanol at 100°C. UHPLC–DAD showed retention times (min) of 0.67, 1.93 and 1.90 for GA, RT and QT, respectively in the shortest runtime of 3 min. The yield for phenolics was higher for STE/ASE (ppm): 15.27/15.29 (GA), 85.24/37.56 (RT) and 52.20/33.40 (QT), respectively. In terms of antioxidant activities, low IC₅₀ values (μg/ml) of 1.09/1.18 (DPPH), 2.11/5.32 (ABTS) and 4.35/7.88 (phenazine methosulfate–nicotinamide adenine dinucleotide) were observed for STE and ASE, respectively. Multivariate analysis for STE showed a significant (P = 0.000) correlation for extraction type vs. extract yield and phenolics content; however, there was no significance for antioxidant activities vs. extraction type. ASE showed a positive correlation for solvent vs. extraction yield, phenolics and antioxidant activity; however, there was no correlation for extraction yield and DPPH activity. Principal component analysis for STE showed a major variability (52.02%) for extraction yield and phenolics in PC1 followed by PC2 (38.30%) for antioxidant activities. For ASE, PC1 (48.68%) showed a positive correlation for solvent vs. extraction yield and phenolics while PC2 (33.12%) showed a positive correlation for temperature and antioxidant activities. STE and ASE were the optimized extraction techniques for the garlic food sample while a significant effect of solvent and temperature was observed upon extraction yield, phenolics and antioxidant activity.     

Optimization of anionic conductivity through the coexistence of ionomer cluster and backbone-backbone morphologies in anion exchange membranes

Random copolymers of poly(4-vinylpyridine) and polyisoprene were synthesized, and subsequently quaternized with 1-alkylbromides. The number of carbons on the pendant side-chain of the resultant comb-shaped polymer, n, ranged from 2–8. The comb-shaped polymers were crosslinked employing thiol-ene chemistry to give mechanically robust ion conducting membranes. Analysis by wide and medium-angle X-ray scattering show three morphology regimes that are dependent on the number of carbons on the pendant side-chains. When n = 2, ionomer cluster morphology was dominant, when n = 8 backbone-backbone morphology was dominant, and when n = 3–6, the membrane showed a coexistence of both ionomer cluster and backbone-backbone morphologies. Evaluation of the water uptake of the membranes showed a maximum water uptake per cation of 9.5 when n = 5 at 95% relative humidity (RH) and 60°C. Conductivity of the samples characterized by electrochemical impedance spectroscopy showed bromide conductivity as high as 110 mS/cm when n = 3 at 95% RH and 90°C.     

贝叶斯优化卷积神经网络公共场所异常声识别*

针对公共场所异常声的感知和识别问题,提出一种基于贝叶斯优化卷积神经网络的识别方法。提取声信号的Gammatone倒谱系数、倍频程功率谱、短时能量和谱质心,组合成声信号的特征图。构建卷积神经网络作为分类器,利用递增的卷积核设置和池化操作处理不同尺度的特征。基于贝叶斯优化算法优化卷积神经网络的模型参数,对包括火苗噼啪声、婴儿啼哭声、烟花燃放声、玻璃破碎声和警报声的5种公共场所异常声进行识别。该方法的识别结果与基于不同的特征提取和分类器方案得到的识别结果进行比较,结果表明该方法的识别效果优于其他特征提取和分类器方案的识别效果。最后分析了该方法在不同信噪比噪声干扰下的识别结果,验证了该方法的有效性。     

A survey on HHL algorithm: From theory to application in quantum machine learning

The Harrow-Hassidim-Lloyd (HHL) algorithm is a method to solve the quantum linear system of equations that may be found at the core of various scientific applications and quantum machine learning models including the linear regression, support vector machines and recommender systems etc. After reviewing the necessary background on elementary quantum algorithms, we provide detailed account of how HHL is exploited in different quantum machine learning (QML) models, and how it provides the desired quantum speedup in all these models. At the end, we briefly discuss some of the remaining challenges ahead for HHL-based QML models and related methods.     

基于相场描述的拉压不对称强度结构拓扑优化

运用了基于相场描述的拓扑优化方法，来寻找在拉伸和压缩中表现出不对称强度行为的连续体结构的最优布局。依据Drucker-Prager屈服准则和幂率插值方案，优化问题可以描述为在局部应力约束下的最小化结构的体积。用qp放松法来解决应力约束的奇异性，并采用基于P-norm函数的聚合方法对应力约束进行凝聚，该方法实现了约束个数的降低，同时引入了稳定转化法来处理大量的局部应力约束和高度非线性的应力行为，以修正应力，提高优化收敛的稳定性。在优化问题求解时，使用拉格朗日乘子法对目标函数和应力约束进行处理。利用伴随变量法进行灵敏度分析，并通过求解Allen-Cahn方程更新相场函数设计变量。数值算例证明了该优化模型和相应数值技术的有效性，相关算例还揭示了考虑拉压不同强度和考虑同拉压强度约束时得到的结构优化拓扑构型具有显著的差异。     

Experimental and theoretical assessment of Fe-doped indium-oxide-based dilute magnetic semiconductors

Specimens of iron-doped indium oxide (In_1-xFe_x)₂O₃ with x?=?0.015, 0.03, 0.045 and 0.06, amalgamated through a traditional solid-state reaction method followed by H₂/air sintering, were characterised using an X-ray diffractometer (XRD), a vibrating sample magnetometer (VSM), and a scanning electron microscope (SEM) to investigate their structural, magnetic and morphological properties respectively. According to XRD plots, all the specimens exhibit cubic bixbyite structures along with ancillary phases. Magnetic assessment showed that In₂O₃ has a negative susceptibility, exhibiting diamagnetic behaviour at room temperature. The doping of Fe ions induces ferromagnetic (FM) ordering, which is enhanced with increasing doping content. The strength of the magnetisation increases when the specimens are exposed to H₂ but is reduced on further air sintering. A bound magnetic polaron (BMP) model is successfully fitted to the observed FM data involving localised carriers and magnetic cations. A multivariate assessment viz. a hierarchical cluster analysis (HCA) was used to corroborate and strengthen the experimental determined magnetic properties. A homogeneous particle distribution was observed in all SEM micrographs and is validated through MATLAB-based simulation by applying a watershed segmentation algorithm. Surface plots also confirm the change in magnetic properties with increase in doping concentration.     

基于LS -DYNA公路桥车桥耦合的车辆模型研究

研究公路桥梁在移动车辆荷载作用下的动力响应,建立合理的车辆模型非常重要。为更真实地体现桥梁在车载作用下的动力响应,基于LS-DYNA程序,结合常用重型车辆的结构特性及参数,对车辆的橡胶轮胎、轮胎内气体压力、车轮转动和车辆悬架系统进行模拟,使车辆模型更接近实际车辆。通过车辆轴重和动力特性初步验证车辆有限元模型的有效性;同时,以一座混凝土简支空心板梁桥为算例,验证车轮转动和车桥相互接触力,并将LS-DYNA计算结果与桥梁实测结果进行对比,进一步验证车辆有限元模型的有效性。研究结果表明,基于LS-DYNA建立的三维车辆有限元模型是可行的,可以用于研究车桥相互作用。